lagging deformation câu

It's an area where we're lagging behind other provinces.Đây là lĩnh vực mà chúng ta đi sau nhiều quốc gia khác. For this reason, they ...

Too long breaks in watering lead to leaf deformation.Quá lâu nghỉ trong tưới nước dẫn đến biến dạng lá. deformation of the ear structu...

It's an area where we're lagging behind other provinces.Đây là lĩnh vực mà chúng ta đi sau nhiều quốc gia khác. For this reason, they ...

The Chikou Span (5), on the other hand, is a lagging indicator projected 26 periods in the past.Mặt khác Chikou Span (5) là chỉ báo sau...

Your insurance premiums are based on lagging indicators.Tại vì price-based indicators là lagging indicators. That’s because they’re la...

Secondly, the inverter load current with no load must be tracked very accurately if the inverter is not to see either a leading or lagg...

Inverter current remains leading by 90 degrees until the maximum power point is reached, where it again abruptly slews through 180 degr...

Special additives such as mica can be added to the PET to minimize bending deformation.Các chất phụ gia đặc biệt như mica có thể được t...

Nine, ACM acrylate rubber seal: Excellent resistance to oil, high temperature and weather resistance, but mechanical strength, compress...

If we think of the parameter of H as time then H describes a continuous deformation of f into g, at time 0 we have the function f.Nếu t...

Therefore, as long as the deformation energy is within the range of forming energy, cold forging can easily obtain good dimensional acc...

Such a high temperature is necessary to avoid strain hardening of metal during the deformation process.Kiểu này nhiệt độ cực cao là cần...

As the deformation rate of the polyethylene increases, LDPE demonstrates a dramatic rise in viscosity because of chain entanglement.Khi...

Forging is mainly classified according to the forming method and the deformation temperature.Rèn được phân loại chủ yếu theo phương phá...

Although the process that forms drumlins is not fully understood, their shape implies that they are products of the plastic deformation...

Under the same load conditions, the elastic deformation of Si3N4 ceramic is small.Trong cùng điều kiện tải, sự biến dạng đàn hồi của Si...

(6) If the hose caused by excessive deformation of self-weight, there should be support pieces.(6) Nếu ống dẫn do sự biến dạng quá mức ...

The reason for inelastic deformation of unvulcanized rubber can be found in its chemical nature: rubber is made of long polymer chains....

Glaciers move, or flow, downhill due to gravity and the internal deformation of ice.[21] Ice behaves like a brittle solid until its thi...

Under normal circumstances, the water content of each change of 1%, longitudinal deformation of 0.025% to 0.05%, lateral deformation of...

Under normal circumstances, the water content of each change of 1%, longitudinal deformation of 0.025% to 0.05%, lateral deformation of...

When the temperature is kept above 70°C, YUPO paper is prone to permanent deformation.Khi nhiệt độ được giữ trên 70 ° C, giấy YUPO dễ b...

Relaxation of the stress causes a slight plastic deformation of the spring, especially at high temperatures.Thư giãn căng thẳng gây ra ...

When the load is higher than 3 MPa, residual deformation occurs, and when it is loaded to about 20 MPa, it will be crushed.Khi tải cao ...

Resistance to deformation by shear force.Biến dạng do lực cắt Shear deformation Vinamold® is available in 4 grades (Red, Natural, Whit...